MS(EE) (BUES): Recent submissions

  • SIMULATION AND PERFORMANCE EVALUATION OF 100KW GRID TIED SYSTEM 
    MUHAMMAD SOHAIB HARIS, 01-244171-022 (Electrical Engineering, Bahria University Engineering School Islamabad, 2019)
    Now a days renewable energy source is requirement to eliminate resource limitation and elimination of harmful products e.g. CO2. Pakistan has potential for sun powered power because of its land area. So grid connected ...
  • Optimal Reconfiguration of Distribution Network for Voltage Profile Improvement and Power Loss Minimization Using Distributed Generation (Sizing & Placement) 
    MUHAMMAD FAISAL ASHRAF, 01-244172-023 (Electrical Engineering, Bahria University Engineering School Islamabad, 2019)
    Electrical power systems are multifaceted, and distribution networks are the most wideranging part of them. Minimum level of voltage of distribution system is the main cause of significant power losses in system overall. ...
  • AN EFFICIENT DEMAND SIDE MANAGEMENT SYSTEM USING HEURISTIC APPROACH 
    MEMOONA BATOOL, 01-244172-015 (Electrical Engineering, Bahria University Engineering School Islamabad, 2019)
    One of the key contributions of the smart grid is demand-side management (DSM). DSM allows a consumer to schedule its energy consumption pattern to reduce electricity cost, and to benefit the utility grid by reducing ...
  • HARDWARE IMPLEMENTATION OF OVERLAP SAVE METHOD BASED FADING CHANNEL EMULATOR 
    MUHAMMAD NAUMAN, 01-244172-045 (Electrical Engineering, Bahria University Engineering School Islamabad, 2019)
    Wireless communication systems require extensive and thorough evaluations before field trials and actual deployment. Difficulty in real time testing makes it the least favourable option for field trials prior thorough ...
  • Implementation of AI based approach for disturbance estimation of a MIMO nonlinear system 
    TALHA SHAKIL, 01-244211-015 (Electrical Engineering, Bahria University Engineering School Islamabad, 2023)
    Postural control is the ability to maintain equilibrium by keeping or returning the center of gravity (COG) over its base of support (BOS), and it relates to how the body’s position in space controls for stability. The ...
  • NON-LINEAR CONTROL OF TWO FINGERS MODEL FOR MOVEMENT COORDINATION 
    ASRA SARWAT, 01-244211-001 (Electrical Engineering, Bahria University Engineering School Islamabad, 2023)
    There are a lot of functions of the hand in our daily life, for example we express our thoughts, explore, and perform ADL’s (active daily living activities). In this study realization of two coordinated fnger modeling, ...
  • A Novel Hybrid Swarming Based Computational Paradigm for Optimizing Fuel Generation Cost and Copper Losses in Power System 
    NOUMAN SAEED BABAR, 01-244211-014 (Electrical Engineering, Bahria University Engineering School Islamabad, 2023)
    Optimal power system planning play the part of key importance in operation and management of dynamics in power network. In this regard optimal power flow addresses two sub problems that includes Economic load dispatch (ELD) ...
  • Analysis of Optimal BESS Sizing in Maritime Microgrids Considering Available Topographical Generation-Mixes 
    UMAIR ZIA, 01-244211-012 (Electrical Engineering, Bahria University Engineering School Islamabad, 2023)
    Shipping contributed 1.046 million tons of CO2 in 2007, or 3.3 percent of global emissions. Based on current trends, this number could double or triple by 2050. In response to this enormous pressure on the environment, ...
  • Optimal Design of Hybrid Renewable Energy System (HRES) for Institutional Building. A Case Study of University Campus 
    Waqar Ahmed, 01-244202-020 (Electrical Engineering, Bahria University Engineering School Islamabad, 2022)
    Pakistan's power generation is mostly dependent on fossil fuels. Therefore, the minimum grid power with maximum renewable energy sources can be used to fulfill the load demand. Only medium and small energy consumers can ...
  • Implementation of Aho-Corasick String Matching Algorithm on FPGA 
    USAMA BIN ZAHID, 01-244181-025 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    A review of the existing pattern matching algorithms shows that the software-based solutions pertaining to pattern matching do not encounter today’s throughput network systems. Pattern matching is used to examine Ethernet ...
  • IMPLEMENTATION OF SIDE CHANNEL RESISTANT BINARY HUFF CURVES ON FPGA 
    USAMA UMER, 01-244182-016 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    This thesis provides hardware architecture to perform point multiplication (PM) operation using recently proposed (in 2018) unified addition law of Binary Huff Curves (BHC) model of Elliptic Curve Cryptography (ECC). The ...
  • Energy and spectral efficient cognitive radio sensor networks for internet of things 
    MUKRAMEEN, 01-244171-027 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    The energy-efficiency of wireless sensor devices and the scarcity of wireless spectrum are two major design considerations in any wireless sensor network (WSN). Since the sensors devices are battery powered and often are ...
  • DESIGN AND ANALYSIS OF PATCH ANTENNA FOR WIRELESS COMMUNICATIONS 
    MUSA HUSSAIN, 01-244182-012 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    Antenna plays an important function in any wireless communication system. In antenna history, patch antenna is be the simple antennas ever design and widely used for many applications. This work contains three different ...
  • FM Attack: Mitigation and Robust Control in a Smart Grid 
    TANVEER HUSSAIN, 01-244211-011 (Electrical Engineering, Bahria University Engineering School Islamabad, 2021)
    It is very challenging to construct an effective, environmentally friendly, and versatile smart grid cyber-physical system (CPS) while retaining high resilience and security, especially given the constantly evolving cyber ...
  • DYNAMIC LOAD FLOW OF CIGRE MV/LV DISTRIBUTION BENCHMARK MODEL 
    ASAD ABBAS, 01-244182-002 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    Variations in load and renewable DGs brings overall fluctuations in distribution system as a result stability of system disturbs in the form of system losses enrichment and reduction in bus voltage profiles. The system ...
  • TECHNO-ECONOMIC PERFORMANCE ASSESSMENTS OF BESS IN MICROGRIDS CONSIDERING VARIOUS PARAMETERS 
    Danish Majeed, 01-244182-003 (Electrical Engineering, Bahria University Engineering School Islamabad, 2021)
    The standalone microgrids can be used as a suitable alternative to the energy that is generating from conventional energy resources. Standalone microgrids contain fewer losses and much more efficient as compared to ...
  • ULTRA-WIDE BAND ANTENNA DESIGN TO IMPROVE DETECTION IN MICROWAVE IMAGING 
    ZAHID ULLAH, 01-244171-038 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    In this research, a UWB antenna is designed for breast cancer detection. The technology on which it works is microwave imaging. The frequency range is between 1.5GHz-6.5GHz spectrum which meets the requirements of our ...
  • COMPARATIVE ANALYSIS OF FLEET OF EV INTEGRATION IN AC, DC AND HYBRID MICROGRID 
    MUHAMMAD WAQAR HASSAN, 01-244181-018 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    Electric vehicles (EVs) are the prominent choice in the transportation sector to decrease the consumption of fossil fuels as well as greenhouse gases (GHG) productions. Microgrid operations especially hybrids AC/DC pave ...
  • Smart Energy Management System for Optimal Microgrid Operation 
    Bilal Saeed Umar, 01-244182-019 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    From the past decade there always have been improvement in the power system decentralization to achieve optimal microgrid operation whenever there is an increased integration of renewable energy resources. To improve ...
  • EFFICIENT IMPEDANCE BASED DC-AC CONVERTER 
    HUBAIB KHAN, 01-244181-008 (Electrical Engineering, Bahria University Engineering School Islamabad, 2020)
    The output power that can be achieved from Z-source converter is (theoretically) up to ∞, the higher output power the higher will be the voltage/current stress on the passive component of inverter which can destroy ...

Search DSpace


Advanced Search

Browse

My Account