Final Year Project Report (BUES): Recent submissions

  • Anaerobic treatment of Textile Mill effluent and potential of biogas generation (P-0763) (MFN 3071) 
    Syed Asad Abbas; Amina Aslam (Earth & Environmental Sciences, Bahria University Engineering School Islamabad, 2011)
    The textile industry is one of the most important sectors of Pakistan. It contributes significantly to the country’s GDP, exports as well as employment. It is, in fact, the backbone of the Pakistani economy. Production ...
  • Subsurface Structural Interpretation Using 2D Seismic and Seismological Data of Pindori Area, Upper Indus Basin, Pakistan (P-1034) (MFN 3072) 
    Muhammad Usman; Arslan Jamil; Muhammad Qamar Hussain (Earth & Environmental Sciences, Bahria University Engineering School Islamabad, 2011)
    The study area, Pindori block, lies in the Potwar sub-basin of Upper Indus Basin. The production of hydrocorbon in the Upper Indus Basin comes primarily from faulted anticlinal traps in rocks ranging in age from Cambrian ...
  • Integrated study for hydrocarbon potential and reservoir evaluation of Qazian 1x, Gujjar Khan, Potwar sub-basin using seismic and wireline log data (P-1076) (MFN 3108) 
    Abdul Hakeem; Faizan Jadoon; Hassan Haroon (Earth & Environmental Sciences, Bahria University Engineering School Islamabad, 2012)
    The main purpose of the study is to evaluate hydrocarbon potential of the study area, in a part of Upper Indus basin i.e. Qazian oil field and delineation of potential leads for future prospects. This has to be done by ...
  • 2D seismic interpretation and estimation of rock properties of Sujawal block, lower Indus basin, Pakistan (P-1077) (MFN 3109) 
    Maryam Saeed; Hamad Raza; Syed Saboor Pasha (Earth & Environmental Sciences, Bahria University Engineering School Islamabad, 2012)
    Generally the aim was to understand the tectonics and geology of the Sujawal block along with the interpretation procedure of migrated seismic sections and to check out the subsurface structures. As the area is an ...
  • Design and Implementation of Ethernet Encryptor (P-0105) (MFN 3140) 
    Asim Rafiq; Zarar Khanzada; Muhammad Nadeem (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    This project is to design and implement 128-bit Ethernet cryptographic process using FPGA. .The goal of the project is to securely transmit data over transmission medium. The Administrator will have the right to change the ...
  • Toll plaza automation using digital image processing and using serial interface with microcontroller (P-0106) (MFN 3131) 
    Siddiq Bhatti; Sarmad Abbas (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    Digital image processing is use of algorithms and techniques to perform image processing on digital images and in Automobile Recognition, unmanned vehicles and auto driver for vehicle. The basic theme of our system is to ...
  • Camera Based Touchless Interface (P-0107) (MFN 3132) 
    Umar Jamal; Bilal Ahmad Khan (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    Natural user interface is one of the major focuses of research in computer vision because of computers enlarge integration in our daily lives. For intuitive human-computer interaction, hand gestures are the appealing option ...
  • Ratina based automated weapon system (P-0108) (MFN 3133) 
    Waqas Ahmad Subhan; Muhammad Zohaib Sadaqat (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    The use of the eye based systems is gradually increasing due to there accuracy and precision. This project has been done by keeping the futuristic requirements in sight. By using the sensors, a retina can be made to ...
  • Automated Self-Parking System for Car Using On Board Embedded Systems (P-0109) (MFN 3134) 
    Hassan Mushtaq; Muhammad Waqas; Muhammad Tayyab (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    The aim is to develop a system in a car that helps a driver to park the car accurately in the available space, as parking is a real test of driver’s skills during which most of them stumbled upon while maneuvering car back ...
  • Simulation and Implementation of Spectrum Sensing Techniques (SST) of Cognitive Radio (P-0110) (MFN 3135) 
    Muhammad Hashim; Malik Rizwan; Ihtisham Ul Haq (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    The policy of fixed spectrum makes spectrum utilization efficient more difficult, through which maximum portion of primary spectrum was unutilized. The new innovation in communication technology called cognitive radio can ...
  • Obstacle detection and guidance system using RFID (P-0111) (MFN 3136) 
    Asad Ullah; Muhammad Arslan Hafeez; Tahir Saleem (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    The term RFID describes the use of radio frequency signals to provide automatic identification of devices. The overall goal is to produce RFID reader that is capable of receiving more than one bit of information from the ...
  • Automatic Pralka (P-0112) (MFN 3137) 
    Hassan Ali; Sajawal Ali; Naeem Tariq (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    Pralka is a Polish language word means washing machine. This machine makes the washing process easier because of its embedded system which makes the machine fully automatic Core of this embedded system is ...
  • Employee's Monitoring System Through Infrared (P-0113) (MFN 3138) 
    Malik Harris; Sheraz Ahmed (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    Until now in industries, large organization, hospitals, offices have monitoring systems on their entrances like biometric and cameras. The operator in monitor room has the tedious task of monitoring more than 30-40 camera ...
  • Vision Based Ball Collecting Robot (P-0114) (MFN 3139) 
    Muhammad Zohaib Aziz Khan (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    With the advancement in electrical and mechanical engineering, a new form of machines came into scene; called Robots. A Robot is a combination of electronics, mechanical design and software. If we see the modern world ...
  • Implementation of W-CDMA protocol on FPGA (P-0115) (MFN 3130) 
    Muhammad Hassan; Kashif Nisar, 01-133082-133 (Computer Engineering, Bahria University Engineering School Islamabad, 2012)
    This project is to design and implement 128-bit Ethernet cryptographic process using FPGA. .The goal of the project is to securely transmit data over transmission medium. The Administrator will have the right to change the ...
  • Crypto Graphic Processor Base on FPGA (P-0207) (MFN 2812) 
    Zahra Shafiq, 01-133072-168 (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The project idea is about to design a cryptographic processor implementing AES as the algorithm for encryption/decryption processing. AES is selected from other cryptographic standards because it is stronger and faster and ...
  • RFID based library management system (P-0208) (MFN 2813) 
    Saqib Majid; Ubaid Ur Rehman; Arsalan Khan (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our goal is to design a fuel dispenser based on industrial controlling computer; adopt advanced computer technology, together with high precision meter. It’s a measuring device for filling fuel for cars in petroleum station. ...
  • Microcontroller based digital automated fuel dispenser (P-0209) (MFN 2814) 
    Muhammad Mohsin Anjum; Usman Shahzad Ranjha; Qasim Fareed Shad (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our goal is to design a fuel dispenser based on industrial controlling computer; adopt advanced computer technology, together with high precision meter. It’s a measuring device for filling fuel for cars in petroleum station. ...
  • X band Low Noise Amplifier and Ultra Broad Band Wilkinson Power Divider (P-0210) (MFN 2815) 
    Tahir Imran; Waseem Ahmed, 01-133072-070; Tanveer Zahid (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    Our final year Project is divided into two parts: X Band Low Noise Amplifier and 2GHz- 18GHz Broadband Wilkinson power divider. In Microwave communication the first stage of each microwave receiver has Low Noise Amplifier ...
  • Autonomous Unmanned Ground Vehicle for Landmines Detection (P-0197) (MFN 2816) 
    Muhammad Zahid Khan, 01-133072-133 (Electrical Engineering, Bahria University Engineering School Islamabad, 2011)
    The goal of project is to design an unmanned ground vehicle (UGV) that can navigate and adapt to its surroundings. Unmanned vehicles will have many important roles in the upcoming future. The importance of these vehicles ...

Search DSpace


Advanced Search

Browse

My Account