Final Year Project Report (BUES): Recent submissions

  • Combat Quad Copter (P-0097) (MFN 4671) 
    Sajid Ali; Ejaz Ahmed; Rabia Touseef (Computer Engineering, Bahria University Engineering School Islamabad, 2015)
  • Automated Detection of Glaucoma from Digital Retinal Images (P-0098) (MFN 4674) 
    Adeel Arshad, 01-133102-190; Kamran Maqbool, 01-133102-206 (Computer Engineering, Bahria University Engineering School Islamabad, 2014)
    Glaucoma is a common eye problem in aging. It is caused by increasing pressure in eye. The pressure increases due to improper exchange of fluid in anterior chamber of the eye that causes death of ganglion cells if it remains ...
  • Lungs segmentation using wavelet packet frames (P-0099) (MFN 4675) 
    Osama Arshad, 01-133102-221; Syed Ali Abbas, 01-133102-235 (Computer Engineering, Bahria University Engineering School Islamabad, 2014)
    Computer-Aided Diagnosis of lung nodules offers a more exact technique for nodule identification which prompts dependable analysis of lung tumor. The segmentation of lungs is a first phase for the detection of nodules. In ...
  • Car Diagnostics tool with OBD II Connector (P-0282) (MFN 4678) 
    Syed Nigah-e-Ali Naqvi, 01-133112-084; Muhammad Shahzad Gul, 01-133112-052; Muhammad Hammad, 01-133112-033 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    Efficient monitoring and management of vehicles is a complex task and hard to do manually. There is a lot of problem and challenges of management and performance optimization. Nowadays, most of the cars have electronic ...
  • Maximum power point Tracking based solar charge controller (P-0281) (MFN 4679) 
    Junaid Maqsood, 01-133112-031; Mirza Qutab Baig, 01-133112-025; Syed Murtaza Ali Shah Bukhari, 01-133112-083 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    Renewable energy based power systems are one of the emerging technologies in modern era especially the solar energy. As the electric power consumption is increasing day by day, there is a need to look at the resources and ...
  • 360 Degree Surveillance and Auto Targeting System (P-0237) (MFN 4681) 
    Ahrar Ali Tahir, 01-133102-011; Zeerak Khan, 01-133102-104; Arif Hussain, 01-133102-018 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    The rising number of terrorist attacks all around the world have given rise to a global demand for effective security mechanisms. The systems currently in use have repeatedly failed in the face of attacks and as a result ...
  • Moving Object Tracking Through Image Processing (P-0280) (MFN 4682) 
    Musharaf Chaudhary, 01-133112-067; M. Yaqoob Harral, 01-133112-059; M. Faiq Khan, 01-133112-042 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    Object tracking is a process of locating a moving object over time using a camera. Tracking is usually performed in the context of higher-level applications that require the location and/or shape of the object in every ...
  • 3-Phase Motor Control Using GSM Technology (P-0279) (MFN 4683) 
    Ehtisham Masood, 01-133112-013; M.Aqib Zaheer, 01-133112-035; M.Armaghan Ahsan, 01-133112-036 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    The idea behind the project title is to develop GSM based control system. That is to start/stop and remote monitoring of the motor. Our outcome is a control system which allows the user to effectively monitor and control ...
  • Long Range Signal Amplifier Using Discrete Components (P-0278) (MFN 4685) 
    Muhammad Maaz Ahsan, 01-133112-046; Faheem Akhtar, 01-133112-210; Muhammad Suleman, 01-133112-054; Ali Raza, 01-133112-008 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    Range of RF system depends upon output power of transmitter, sensitivity of receiver and high gain antennas. Long Range Signal Amplifier transmits message signal at 2.4GHz ISM band and receives at distance of 1km. Yagi-Uda ...
  • Development of a Joystick-based Control for a Differential Drive Robot (P-0243) (MFN 4686) 
    Rehan Anwar, 01-133112-072 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    The joystick based control mechanism provides a dynamic control for a differential drive robot. Project’s novelty lies in the achievement of a full 360-degree of freedom in movement. This robot is featured to be used ...
  • Microcontroller Based Power Transformer Monitoring and Protection System (P-0242) (MFN 4688) 
    Ihsan Farooq, 01-133102-037; Usman Rauf, 01-133102-095; M. Abubakar Qureshi, 01-133102-045 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    Power Transformer is an electrical device which transfers energy between two circuits through Electromagnetic Induction. Power transformers are the most important and expensive equipment in any power supply system. Keeping ...
  • Head Gesture Controlled UGV (P-0241) (MFN 4690) 
    Muhammad Azeem Afzal, 01-133102-052; Wafa Arshad, 01-133102-102; Alyan Perveiz, 01-133102-014 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    The UGV’s which we had seen in past could not be moved autonomously and to control them people would use remote controlled modules and big joysticks. It is difficult to use and carry big sized modules especially in battle ...
  • Lightweight Pseudorandom Number Generator for passive RFID tags (P-0277) (MFN 4691) 
    Yusra Mahmood, 01-133112-200 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    Radio frequency identification (RFID) is the most versatile emerging technology which has greatly revolutionized our lives in the area of ubiquitous systems.RFID is the replacement of barcodes. RFID system requires no ...
  • Implementation of Mimo for Massive Multicore Architecture (P-0276) (MFN 4695) 
    Aqib Rafique, 01-133112-201 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    The recent development of Graphene based Nano antennas, Carbon Nano Tubes (CNTs) and Graphene Nano Ribbons (GNRs) have opened up a new pathway for the Electromagnetic communication. Modern microprocessor architecture design ...
  • Position Control for Linear Actuator using PLC (P-0240) (MFN 4698) 
    Muhammad Suhail, 01-133102-247; Noor Aziz, 01-133102-071; Muhammad Amjad, 01-133102-049 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    The project is about product measurement and quantitative analysis unit. It performs these two functions; it measures the length of an industrial product (piece of glass slabs, piece of an iron sheet or pipe etc.) and ...
  • Generator Performance Testing (P-0239) (MFN 4699) 
    Arslan Naseer, 01-133102-020; Muhammad Umair Latif, 01-133102-063 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    Generators are versatile source of electric power. Generators have numerous applications in many industries and that is why they are considered very pivotal devices. The optimal performance of the generator depends on its ...
  • Solar PWM Charger (P-0275) (MFN 4701) 
    Muhammad Bilal, 01-133112-038; Haroon Akbar, 01-133112-021 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    The technology for solar battery charge controllers has undergone great advancements in the past few seasons. The most emerging new technology isPWM algorithmic charging technique, which gained popularity increasingly.Charging ...
  • BTS Power Monitoring and Alarm System based on GSM module (P-0238) (MFN 4702) 
    Laraib Aamer, 01-133102-039 (Electrical Engineering, Bahria University Engineering School Islamabad, 2014)
    Telecom industry is amongst the biggest industries. We cannot afford any outage of power especially in a country where energy crisis is a big problem. BTS power monitoring and alarm system is a system which will monitor ...
  • Development of Open Source FDM 3D Printer (P-0274) (MFN 4703) 
    Abdul Rehman Waseem Mir, 01-133112-002; Usman Khalid, 01-133112-092 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    The world with its constants struggle for evolution enabled the man to strive for the new challenges and inventions. Keeping in mind the technological revolution, the concept of 3d printing evolves. The thought behind this ...
  • Cool Bank (P-0273) (MFN 4704) 
    Umair Ahmed, 01-133112-088; Sanan Ali Khan, 01-133112-077 (Electrical Engineering, Bahria University Engineering School Islamabad, 2015)
    Currently our country (Pakistan) is going through strong economic and energy crises (loadshedding). So it is highly required to design such systems which are economical as well as can overcome the load-shedding. In this ...

Search DSpace


Advanced Search

Browse

My Account